Battery FAQ
14 Oct 2024
14 October 2024
14 October 2024
1. For 12.8v series battery, we recommend use 12.8V LiFePO4 battery charger, with charging current ≤ battery’s BMS.
2. For 25.6v series battery, we recommend use 25.6V LiFePO4 battery charger, with charging current ≤ battery’s BMS.
3. For 51.2v series battery, we recommend use 51.2V LiFePO4 battery charger, with charging current ≤ battery’s BMS.
Our battery supports up to 4 identical batteries in series/parallel. Read on lifepo4 battery in series vs parallel to learn more details.
Our battery’s operation temperature of discharge is between -20℃to 60℃, and the charging temperature is between 0℃to 50℃.
It depends on the built-in BMS.
For example, a battery built-in 100A BMS, then it’s max continuous charging/discharging current would be 100A.
BATE12V 100Ah can be installed in any direction, even upside down. Other battery types can be mounted upright with the studs facing up or on their 2 smaller sides. You can learn more about BATE 12.8V 100Ah.
If you have more than one lithium iron phosphate battery, install it so that its studs do not come into direct contact.
BATE charger is perfectly matched with our batteries, if you purchase our charger for our batteries, they will perform more steadily and good for its lifespan.
Check the specific spec of the battery to see if it fit your power consumption needs of the devices you want the battery to power for. If you are still not sure about the compatibility, you could directly contact us on the batelitihium.com website or by email: wiuo@batelithium.com
BATE lithium provides:
●24 hours customer service
●Specific and professional technical support
●Local warehouse, lead time is 2~7 working days
●5-year device protection
Nhận thông tin cập nhật mới nhất về sản phẩm và chương trình khuyến mãi của chúng tôi.
Thanks for subscribing!
This email has been registered!