LiFePO4 batteries and energy storage

Product photos, specifications and published technical articles.

Products

12.8V 100Ah LiFePO4 Battery for Solar StorageThis 12.8V 100Ah LiFePO4 battery stores 1.28kWh of nominal energy for small solar storage and DC backup loads. Size the system from load current and required running time, allowing for conversion losses and the permitted depth of discharge. Check the LiFePO4 charger settings, BMS current limit and installation temperature before choosing a battery; terminal voltage alone does not establish compatibility. Warranty: 3 years · 3000 cycles.

25.6V Wall Mounted LiFePO4 Solar Battery 100Ah | 200Ah | 314AhThe 25.6V wall mounted LiFePO4 battery series provides a space-saving format for a compatible low-voltage solar storage system. Choose the available Ah option from daily energy use, then check the inverter battery input range and permitted charge current. Wall strength, cable access and ventilation are part of the installation design. A 24V-class system still needs model-specific voltage settings and BMS checks. Warranty: 7 years · 8000 cycles.

51.2V Rack Mount LiFePO4 Battery for Solar Storage 50Ah | 100Ah | 200Ah | 314AhThis 51.2V rack mount LiFePO4 battery series is intended for a compatible solar battery rack or cabinet. The rack format allows equipment to be organised with accessible terminals and communication wiring. Match the selected Ah option to inverter demand, then verify the supported BMS protocol, firmware and parallel configuration. CAN or RS485 connectors do not by themselves confirm inverter compatibility. Warranty: 7 years · 8000 cycles.

51.2V Wall Mounted LiFePO4 Home Battery 50Ah | 100Ah | 200Ah | 314AhThe 51.2V wall mounted LiFePO4 home battery series keeps floor space available while providing storage for a matched solar inverter. Compare the Ah options against the energy needed by essential circuits, rather than total house peak power alone. Confirm the wall fixing method, battery voltage window, charge settings and communication protocol. Backup operation depends on the complete inverter and changeover arrangement. Warranty: 7 years · 8000 cycles.

16kWh 314Ah 51.2V Floor-Standing LiFePO4 Home BatteryThis 51.2V 314Ah floor-standing LiFePO4 battery is listed in the 16kWh class for home solar storage. A floor-standing enclosure can suit sites where wall mounting is unsuitable, subject to a level base and service access. Calculate essential-load energy before estimating backup duration, then check inverter power, battery current and installation conditions. Energy capacity in kWh is not the same as continuous output power in kW. Warranty: 7 years · 8000 cycles.

20.48kWh 400Ah 51.2V Floor-Standing LiFePO4 Solar BatteryThe 51.2V 400Ah floor-standing LiFePO4 battery has 20.48kWh of nominal energy. Compare it with the 16kWh-class unit using the same load profile, usable discharge allowance and inverter efficiency. The larger energy figure may extend running time, but does not establish a higher continuous power rating. Check the selected battery current limits, cable design and inverter settings before installation. Warranty: 7 years · 8000 cycles.

High Voltage LiFePO4 Battery for Commercial Energy StorageThis high voltage LiFePO4 battery system is a DC storage building block for a matched commercial energy storage design. It requires a compatible PCS or inverter, BMS integration and project-specific DC protection. Check the full operating voltage window, charge and discharge current, isolation and communication requirements. A battery rack alone does not provide a complete AC supply or a ready-to-connect all-in-one BESS. Warranty: 7 years.

All-in-One LiFePO4 BESS for Commercial Energy Storage 50kW | 100kW | 125kW | 215kWThe all-in-one LiFePO4 BESS series brings battery storage and power conversion into a commercial system configuration. Select the available kW model alongside the required battery energy, site load profile and control strategy. Peak shaving and solar self-consumption depend on metering, EMS settings and the project operating plan; they are not guaranteed savings. Confirm the equipment included in the final system proposal. Warranty: 7 years.

Off-Grid Hybrid Solar Inverter 1.2kW | 3.6kW | 6kW | 12kWThis off-grid hybrid solar inverter series combines solar conversion and battery charging functions for an appropriately designed independent or backup system. Choose the kW option from continuous loads and motor starting demand, then verify the battery voltage and PV input limits for that exact model. Check MPPT string design and changeover wiring. An off-grid inverter must not be assumed to support grid export. Warranty: 5 years.

On/Off Grid Hybrid Solar Inverter 6kW | 12kWThe on/off grid hybrid solar inverter series manages PV generation and battery storage in a compatible system. Match the selected kW model to the load and battery current limits, and check the manufacturer operating modes for grid-connected and backup use. Solar self-consumption requires suitable metering and configuration. Grid export, anti-islanding approval and backup circuit design must be confirmed for the installation location. Warranty: 5 years.

Battery Power Conversion System (PCS) 15kW | 25kW | 30kW | 40kW | 50kW | 60kWThis battery power conversion system converts energy between a compatible DC battery bank and the AC side of an energy storage installation. Select the kW option to match load demand, then check the DC voltage window and BMS/EMS interface for that exact model. AC power rating, battery energy and PV input are separate design limits. Solar input and backup arrangements require confirmation in the project wiring diagram. Warranty: 5 years.

Microgrid Power Conversion System (PCS) 100kW | 125kWThis microgrid power conversion system is a conversion component for an engineered battery storage network. Match the available kW model with the battery voltage window, generator controls and EMS strategy. AC coupling, DC coupling and switching equipment must follow the approved system design. A PCS on its own does not establish seamless transfer, generator compatibility or a complete microgrid; verify the final equipment combination. Warranty: 5 years.

All-in-One Solar Energy Storage System 125kVA | 250kVA | 375kVA | 500kVAThis all-in-one solar energy storage system integrates power conversion and control functions in a cabinet configuration. The available options are rated in kVA, so determine the load power factor and confirm the corresponding continuous kW rating rather than treating kVA as battery energy. Battery capacity, PV design, protection and the components included in the delivered cabinet must be confirmed for the selected configuration. Warranty: 5 years.

Latest articles

Philippines: renewable energy policy, solar storage and BESS demandLocal policy and market notes for Philippines: solar PV, LiFePO4 batteries, BESS, backup power, dealer opportunities and project customers.

Why LiFePO4 batteries fit solar storage projects in PhilippinesTechnical explanation of LiFePO4 battery advantages for Philippines: long cycle life, BMS protection, inverter matching, backup power and scalable BESS design.

Philippines dealer and project customer guide for Batelithium productsHow dealers, installers, factories, enterprises, hospitals, farms, mines, malls and villa owners in Philippines can select LiFePO4 batteries and BESS.

Philippines installation and service support checklist for solar battery systemsInstallation and after-sales checklist for Philippines: site survey, battery sizing, inverter matching, remote support, spare parts and dealer service workflow.

Malaysia: renewable energy policy, solar storage and BESS demandLocal policy and market notes for Malaysia: solar PV, LiFePO4 batteries, BESS, backup power, dealer opportunities and project customers.

Why LiFePO4 batteries fit solar storage projects in MalaysiaTechnical explanation of LiFePO4 battery advantages for Malaysia: long cycle life, BMS protection, inverter matching, backup power and scalable BESS design.

Malaysia dealer and project customer guide for Batelithium productsHow dealers, installers, factories, enterprises, hospitals, farms, mines, malls and villa owners in Malaysia can select LiFePO4 batteries and BESS.

Malaysia installation and service support checklist for solar battery systemsInstallation and after-sales checklist for Malaysia: site survey, battery sizing, inverter matching, remote support, spare parts and dealer service workflow.